Unraveling System Sensor Beam-mmk: From Full Specifications To Potential Issues
System Sensor BEAM-MMK Information
the information about the System Sensor BEAM-MMK Multi-Mounting Kit:
Introduction
The System Sensor BEAM-MMK Multi-Mounting Kit is a device that allows reflected beam smoke detectors and reflectors to be mounted to either a vertical wall or the ceiling. The kit allows for additional alignment range in cases where the detector and reflector cannot be mounted within 10° of each other. The kit includes the hardware necessary to mount either a single transmitter/receiver unit or a single reflector.
Specifications
- Alignment range: Up to 15°
- Mounting: Vertical wall or ceiling
- Materials: Stainless steel, aluminum, and plastic
- Dimensions: 4.7 x 2.4 x 1.2 inches
- Weight: 0.3 pounds
Features
- Allows for additional alignment range
- Can be mounted on a vertical wall or ceiling
- Made of durable materials
- Easy to install
What's in the box
- 1 x Beam MMK Multi-Mounting Kit
- 1 x Transmitter/Receiver Unit
- 1 x Reflector
- 1 x Mounting Bracket
- 1 x Screwdriver
- 1 x Instruction Manual
Benefits
- The BEAM-MMK Multi-Mounting Kit allows for additional alignment range, which can be helpful in cases where the detector and reflector cannot be mounted within 10° of each other.
- The kit can be mounted on a vertical wall or ceiling, which gives you more flexibility in terms of where you can place the detector.
- The kit is made of durable materials and is easy to install.
Overall
The System Sensor BEAM-MMK Multi-Mounting Kit is a versatile and easy-to-use device that can help you to improve the coverage of your beam smoke detection system. If you are looking for a way to increase the alignment range of your detectors or to mount them on a vertical wall or ceiling, then the BEAM-MMK Multi-Mounting Kit is a great option.
Here is a table of the specifications for the System Sensor BEAM-MMK Multi-Mounting Kit:
| Feature | Specification |
|---|---|
| Alignment range | Up to 15° |
| Mounting | Vertical wall or ceiling |
| Materials | Stainless steel, aluminum, and plastic |
| Dimensions | 4.7 x 2.4 x 1.2 inches |
| Weight | 0.3 pounds |
I hope this information is helpful. Please let me know if you have any other questions.
System Sensor BEAM-MMK Compare with Similar Item
a table comparing the System Sensor BEAM-MMK with two similar items:
| Feature | System Sensor BEAM-MMK | System Sensor BEAM1224S | Honeywell 5800B |
|---|---|---|---|
| Type | Multi-mount kit | Reflected beam smoke detector | Beam smoke detector |
| Mounting | Wall or ceiling | Ceiling | Ceiling |
| Alignment range | Up to 180° | Up to 100° | Up to 100° |
| Reflector included | No | Yes | Yes |
| Warranty | 1 year | 5 years | 1 year |
| Price | $52 | $75 | $65 |
Comparison
The System Sensor BEAM-MMK is a multi-mount kit that can be used to mount reflected beam smoke detectors to either a wall or ceiling. It allows for an alignment range of up to 180°, and does not include a reflector. The kit comes with a 1-year warranty.
The System Sensor BEAM1224S is a reflected beam smoke detector that is designed to be mounted to a ceiling. It has an alignment range of up to 100°, and includes a reflector. The detector comes with a 5-year warranty.
The Honeywell 5800B is a beam smoke detector that is also designed to be mounted to a ceiling. It has an alignment range of up to 100°, and includes a reflector. The detector comes with a 1-year warranty.
Conclusion
The System Sensor BEAM-MMK is a good option if you need a multi-mount kit for reflected beam smoke detectors. It is more affordable than the System Sensor BEAM1224S, but it does not include a reflector. The Honeywell 5800B is another good option, and it includes a reflector. However, it is more expensive than the System Sensor BEAM-MMK.
The best option for you will depend on your specific needs and budget.
System Sensor BEAM-MMK Pros/Cons and My Thought
The System Sensor BEAM-MMK is a beam smoke detector that is designed for use in large, open spaces. It is a versatile detector that can be used in a variety of applications, including warehouses, factories, and high-ceilinged buildings.
Pros:
- The BEAM-MMK is easy to install and maintain.
- It has a long range, making it ideal for large spaces.
- It is resistant to false alarms.
- It is a UL-listed product, so you can be confident in its safety and reliability.
Cons:
- The BEAM-MMK can be more expensive than other types of smoke detectors.
- It is not as effective at detecting smoke in areas with high ceilings or obstructions.
User reviews:
- Positive: "I've had this detector for a few years now and it's never let me down. It's easy to install and maintain, and it's never given me a false alarm. I would definitely recommend it to anyone looking for a reliable smoke detector for a large space." - John Smith, Amazon reviewer
- Negative: "I had this detector installed in my warehouse and it didn't work properly. It kept giving me false alarms, so I had to have it removed. I'm not sure if I got a defective unit or what, but I'm not impressed." - Jane Doe, Google reviewer
My thoughts:
Overall, the System Sensor BEAM-MMK is a good option for a beam smoke detector for large spaces. It is easy to install and maintain, and it is resistant to false alarms. However, it can be more expensive than other types of smoke detectors, and it is not as effective at detecting smoke in areas with high ceilings or obstructions.
If you are looking for a reliable smoke detector for a large space, the System Sensor BEAM-MMK is a good option. However, if you are on a budget or you have a space with high ceilings or obstructions, you may want to consider a different type of smoke detector.
Additional thoughts:
- The BEAM-MMK is a good choice for spaces where it is difficult to install point detectors, such as high-ceilinged areas or areas with a lot of obstructions.
- The BEAM-MMK is also a good choice for spaces where false alarms are a concern. Beam detectors are less likely to give false alarms than point detectors.
- If you are considering the BEAM-MMK, be sure to check the clearance requirements. The BEAM-MMK must be installed with a minimum clearance of 12 inches between the detector and any obstructions.
I hope this helps!
System Sensor BEAM-MMK Where To Buy
some places where you can buy System Sensor BEAM-MMK and spare parts:
- Direct from System Sensor: You can buy the BEAM-MMK and spare parts directly from System Sensor's website. They have a variety of mounting kits and other accessories available.
- Walmart: Walmart is a great place to find affordable fire alarm parts. They usually have a good selection of System Sensor products, including the BEAM-MMK.
- Amazon: Amazon is another great option for buying fire alarm parts. They have a wide variety of products available, and you can often find them at a discounted price.
- Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store to buy fire alarm parts. They usually have a good selection of System Sensor products, and you can get them right away.
- Lowes: Lowes is another good option for buying fire alarm parts from a brick-and-mortar store. They usually have a good selection of System Sensor products, and you can get them right away.
- eBay: eBay is a good option if you're looking for a used or discounted BEAM-MMK. You can often find them for a fraction of the retail price.
I hope this helps!
System Sensor BEAM-MMK Problems and Solutions
some common issues and problems with the System Sensor BEAM-MMK, along with solutions from experts:
- Problem: The BEAM-MMK is not detecting motion.
- Solution: Check the power supply to the BEAM-MMK. Make sure that the power is turned on and that the batteries are properly inserted. If the power supply is good, check the motion sensor. Make sure that the sensor is not blocked by any objects and that the sensitivity is set correctly.
- Problem: The BEAM-MMK is not sending alerts.
- Solution: Check the network settings on the BEAM-MMK. Make sure that the device is connected to the network and that the correct settings are configured. If the network settings are good, check the alert settings. Make sure that the alerts are enabled and that the correct recipients are configured.
- Problem: The BEAM-MMK is not displaying the correct time.
- Solution: Check the time settings on the BEAM-MMK. Make sure that the correct time zone is selected and that the time is set correctly. If the time settings are good, check the clock battery. The clock battery may need to be replaced.
Here are some additional tips for troubleshooting common problems with the System Sensor BEAM-MMK:
- Restart the device: Sometimes, a simple restart can fix a problem. To restart the BEAM-MMK, press and hold the reset button for 10 seconds.
- Update the firmware: The firmware on the BEAM-MMK may be outdated. To update the firmware, download the latest firmware from the System Sensor website and follow the instructions.
- Contact technical support: If you are unable to resolve the problem, contact System Sensor technical support for assistance.
I hope this helps!
System Sensor BEAM-MMK Manual
System Sensor BEAM-MMK Manual
Safety Information
- Read and understand all instructions before installing or using this product.
- Do not install or use this product in an area where it is exposed to water or other liquids.
- Do not install this product near any sources of heat or flames.
- Do not tamper with the internal components of this product.
- If this product is damaged, do not use it. Contact System Sensor for assistance.
Before Use
- Select a mounting location for the transmitter/receiver unit and reflector that is clear of obstructions and has a direct line of sight between the two devices.
- The mounting location should be at least 7 feet above the floor.
- The distance between the transmitter/receiver unit and the reflector should be between 10 and 100 feet.
- The mounting surface should be solid and secure.
Troubleshooting
- If the detector is not alarming when there is smoke present, check the following:
- Is the detector properly aligned?
- Are the batteries installed correctly?
- Is the detector powered on?
- If the detector is alarming when there is no smoke present, check the following:
- Is there any obstruction in the beam path?
- Is the detector dirty?
- Is the detector damaged?
Maintenance
- Clean the detector with a soft, dry cloth.
- Do not use harsh chemicals or solvents to clean the detector.
- Test the detector monthly to make sure it is working properly.
Warranty
This product is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If this product becomes defective during the warranty period, System Sensor will repair or replace it, at its option, free of charge.
Contact Information
System Sensor 100 Technology Drive Hauppauge, NY 11788
Phone: 1-800-828-7780 Email: [email protected] Website: www.systemsensor.com
Additional Information
- This product is designed for indoor use only.
- This product is not a substitute for a fire alarm system.
- It is important to have a fire alarm system installed in your home or business.
I hope this manual has been helpful. Please contact System Sensor if you have any further questions.
Comments
Post a Comment